Luminosity Logbook Message-id: 19980616-1 Subject: H1Lumi OnLine System Status on today Alexandre Fomenko wrote 17/6/1998 00:01:00 16.06.1998 ===== OnLine ===== H1KFOM === H1Lumi OnLine System Status on today After 1997/1998 shutdown H1Lumi Online System was seriously updated at both hardware and software areas. Hardware upgrade is finished now and software upgrade is mostly finished too. Ideas of "Lumi System DAQ upgrade" which were presented at Igor Sheviakov's notes http://www-h1.desy.de/~sheviako/DAQ97.html http://www-h1.desy.de/~sheviako/DAQupgr96.ps were realized during long shutdown period 1997-1998. H1Lumi MacII after HW upgrade is connected with Lumi VME-bus only and H1Lumi2 MacII - only with CDAQ VME-bus. Region of dual ported memory $B0900000 _ $B0A00000 is not existing anymore at both VME-buses. Some H1Lumi Local Trigger System elements (scalers for PD,ETPD and VC hits counting and H1Lumi Local Timer (2950Hz)) were duplicated for accessing at both VME-buses (for supporting of Usik's applications environment and for as less as possible Usik's application updates). It were made a lot of updates (sometimes only alittle tuning (Lproc98,LTV98,BeamCurrents98, TwinFIC1,TwinFIC1slave,Activate), sometimes serious updates (Tmonitor98, DAQcontr98, H1LumiOnLineFIC2, NewFastLumiMonitor_98)) at most of H1Lumi OnLine software products (applications) for its operation fitting at new hardware environment. Some from applications were "divided" on 2 parts for operation at H1Lumi and H1Lumi2 MacII boards (DAQcontr98, Tmonitor98, NewFastLumiMonitor_98). Some applications were removed forever from standard or option set (BeamPosition, Bunch_hw). Some from applications were not changed and are operated without visible problems with new HW and SW set (Usik's applications - H1_Lumi, H1_Lumi_ph, H1_Lumi_c, HERA_client, ZEUS_client, H1Lumi_20_hours_Monitor, H1Lumi_2 _hours_Monitor, H1Lumi_10minutes_Monitor, Energy_fic1, Energy_Newb09 and applications for high voltage control CAEN3 and Movable Platform Control - MovablePlatform). New standard sets of applications are defined for both H1Lumi and H1Lumi2 MacII and some changings at H1Lumi Shift Instructions (not significant) will follow (for example WatchDog application will operate at both MacII - not only at H1Lumi MacII as it was earlier, "CurrentStatus" window (BBL3 alarms) will operate at H1Lumi MacII - not at H1Lumi1 MacII as earlier, there are not applications "BeamPosition" and "Bunches-hw" at H1Lumi MacII anymore. RunControl,RunSummary, MovablePlatforms operations will run at "ordinary" place - at H1Lumi2 MacII. Modifications of TwinFIC1 and TwinFIC1slave connected with involving of Readout from 8 energy channels from ET8 are at progress now. Short overview of current status of H1Lumi OnLine system is presented at low mentioned notes: 1. DAQ HW after Upgrade98: ========================== a) there are 2 VME-buses at H1Lumi now: 1) CDAQ VME-bus 2) Lumi VME-bus b) there is VSB-bus between DPM8242 modules which are disposed at different VME-bus (it is possible to make VSB access from LUMI FICs programs - read/write from/to CDAQ DPM); c) CDAQ VME-bus is equipped with: 1. two FIC8231 front-end-processors with 512KByte memory each (so called FIC1 Master and FIC1 Slave processors) $B0000000 _ $B0080000 - FIC1 Master local DPM area (512Kbytes) $B0200000 _ $B0280000 - FIC1 Slave local DPM area (512Kbytes) 2. DPM8242 module - 2 Mbytes dual ported memory (so called CDAQ DPM); $B0A00000 _ $B0C00000 - (2MBytes) 3. VIC8250 module - for communication with 10th branch of H1CDAQ and H1Lumi running inside H1CDAQ environment; $B0580000 _ $B0600000 - 512KBytes (B0580000 is base address for MEB-family routines operation) 4. SPARC processor ( CPU-3CE/16) which is running as server for H1Lumi data delivering to anywhere (for MacII applications running at H1 Control Room, at HERA Control Room and anywhere else, for unix applications which are supporting shlu, xshlu, shrs services and bookkeeping into H1DataBase etc.) 5. MacVEE module for H1Lumi2 MacII access to this VME-bus; 6. TriggerCards - FastCard,SlowCard,FanoutCard,TriggerBitsCards etc. - for intercommunication with H1CentralTrigger 7. GPTP modules (bit pipe-line modules for getting bit information for each H1 event (VETE-bank data, ET44 and ET7 Fingers etc.) 8. VMICmaster and VMICslave modules for access to CDAQ FADC crate VMEbus 9. Seven FADC1001 modules - five FADC for ET,ET44,PD and VC data for CDAQ one FADC1001 for data from ET7 and ET8 and one FADC1001 for system monitoring $B0400000 _ $B0405000 - 0000,1000,2000,3000,4000 - ET44,ET,PD.VC,TrigSum $B0405000 _ $B0406000 - for system monitoring $B040A000 _ $B040B000 - ET7/ET8 10. MacII-CAMAC and CAMAC-VME interface module (for VetoWall,Radiation Monitor Monitoring Counter rates monitoring) 11. Local H1Lumi Trigger Cards d) LUMI VME-bus is equipped with: 1. two FIC8231 front-end-processors with 0.5MByte memory each (so called Lumi and Lumi2 processors) $B0100000 _ $B0180000 - Lumi FIC local DPM area (512Kbytes) $B0300000 _ $B0380000 - Lumi2 FIC local DPM area (512Kbytes) 2. DPM8242 module - 2 Mbytes dual ported memory (so called Lumi DPM); $B0A00000 _ $B0C00000 - (2MBytes) 3. MacVEE module for H1Lumi MacII access to this Lumi VME-bus; 4. GPTP modules (bit pipe-line modules for getting bit information inside local DAQ) 5. VMICmaster and VMICslave modules for access to Lumi FADC crate VMEbus 6. Six FADC1001 modules - five FADC for ET,ET44,PD and VC data for local DAQ and 1 FADC for Xpd,Ypd fast monitoring task (Lumi2 processor) $B0404000 _ $B040A000 - 4000 -(Xpd,Ypd fast monotoring), - 5000, 6000, 7000, 8000. 9000 - ET44,ET,PD,VC.TrigSum 7. Local H1Lumi Trigger Cards (scalers) 8. CAEN HV control module 2. DAQ SW after Upgrade98: ========================= CDAQ FICs applications (are prepared at H1Lumi2 MacII environment): --------- 1) HD_H1LUMI:Upgrade98:Centraldaq:TwinFIC1new (Master.bin) TwinFIC1new.....................MPST MPS .....94386 Thu, Jun 11, 11:23 AM 1998 Master application for operation inside 10th branch of H1CDAQ, ReadOut for ET,PD,VC,ET44,ET7,ET8,TrigSum,ET44 fingers,ET7 fingers,bit information for VETE-bank, FNC data. Producing of LREE,(LREF),LRPE,(LRPF),LRE1,(LR1F),LR2F,VETE, LFNC,LRTN,LUPO and retranslation of banks from Local Processing area - LRTL,LUMM, LREP,LRPP,LR1P,LREC,LRPC,LUTR. Interface with H1CTRIG (adequate reaction and acknowledgements on L2Keep, L3Keep,L3Reject,RunStrat,StopRun,EndRun signals from H1CTRIG, FER signal sending as "end of dead time", interface with H1 CDAQ through MEB-family routines. 2) HD_H1LUMI:Upgrade98:Centraldaq:TwinFIC1slavenew (Slave.bin) TwinFIC1slaveNew................MPST MPS .....45138 Mon, May 18, 02:33 PM 1998 Slave application for operation inside 10th branch of H1CDAQ ---------------------------------------------------- Lumi FICs applications (are prepared at H1Lumi MacII environment): --------- 1) HD_LPI5:MPW:Upgrade98:After170498:LocalDAQ:H1LumiOnLineFIC2 (Lumi.bin) H1LumiOnLineFIC2................MPST MPS ....252956 Mon, Jun 15, 11:17 AM 1998 OnLine Luminosity calculation with two methods, Integrated Luminosity Values management, Local data aquisition for 4 local subtriggers (ETPDnVC,ETPDVC,ET44VC and VC), OnLine Reconstruction (ET,PD,VC,ET44), Photon Arm Acceptance Correction calculation, OnLine Calibration (ET,PD,VC,ET44), H1Lumi Trigger monitoring and Control (trigger element setting, local subtriggers, trigger elements thresholds setting and monitoring), Preparing of contents for LRTL,LUMM,LREP,LRPP,LR1P,LREC, LRPC,LUTR BOS banks for H1 Data Flow, some tasks for H1Lumi Slow Control etc. 2) HD_LPI5:MPW:TriggerShev:NEWtriggSet:Activate (Lumi2.bin) Activate........................MPST MPS .....27730 Tue, Jun 02, 05:52 PM 1998 Fast monitoring of Photon beam position (Xpd and Ypd) at H1IP for presentation into HERA Control Room, H1 Control Room and for using at Photon Arm Acceptance Correction calculation ---------------------------------------------------- H1Lumi MacII - applications (h1lumi.desy.de) ------------ - standard application set (are at H1Lumi MacII "StartUpItems" =========================================================== 1) HD_LPI5:Applications:Beam_Currents:Beam_Currents98 Beam_Currents98.................APPL ????.....47254 Tue, Apr 14, 07:23 PM 1998 BeamC.Rsrc......................rsrc RSED.....52935 Tue, Jun 16, 12:06 PM 1998 e beam and p-beam bunch and total currents getting from H1CTRIG (through H1LAN) once per 30 sec (similar to TCUR values). Slow Events sending to H1SlowControl. 2) HD_LPI5:MPW:Wdog:Sample2L (+Lumi.bin, Lumi2.bin) Sample2L........................APPL SHE1.....39855 Tue, Dec 02, 01:20 PM 1997 LUMI.bin........................TEXT ****....262144 Mon, Jun 15, 01:04 PM 1998 Lumi2.bin.......................TEXT ****....131072 Tue, Jun 02, 06:17 PM 1998 watchdog application for monitoring of Lumi FIC1 and Lumi FIC2 operation and for automatically restart of Lumi FIC1 at case of problems. 3) HD_LPI5:TMonitorN98 TmonitorN98.....................APPL STND...1476487 Tue, Jun 16, 11:00 AM 1998 H1Lumi Local Trigger Monitoring and control application, trigger elements setting, threshold setting and monitoring, slow control - "CurrentStatus" window - BBL3 alarms from H1Lumi management 4) HD_LPI5:Applications:Test_app:p_method:H1_Lumi_ph H1_Lumi_ph......................APPL ????.....59858 Fri, Oct 04, 11:32 AM 1996 H1_Lumi.Rsrc....................rsrc RSED....100150 Mon, Jun 15, 12:35 PM 1998 Usik's client application for monitoring of Photon Arm Method of Luminosity measurement. Is supporting with activity of SPARC-applications. 5) HD_LPI5:SystemFolder:AppleMenuItems:LumiDAs:Energy_Newb09 Energy_Newb09...................dfil movr.....19570 Fri, Sep 03, 05:12 PM 1993 Oldest application for monitoring of OnLineReconstruction and OnLineCalibration procedures with different energy histos showing (ETrec,PDrec,VCdep,ETdep,PDdep, PDdep+VCdep,PDdep+ETdep,PDrec+ETrec) - applications for option or expert using: ======================================= 6) HD_LPI5:SuperCard1.6:CAEN3 CAEN3...........................MDOC RUNT....128636 Mon, Jun 15, 12:19 PM 1998 Application for control and monitoring of High Voltage for ET,PD.VC,ET44.ET7.ET8, ET7 Fingers, ET44 Fingers - 3 CAEN mainframes with 40 HV channels each. 7) HD_LPI5:Applications:Test_app:c_method:H1_Lumi_c H1_Lumi_c.......................APPL ????.....59858 Fri, Oct 04, 11:30 AM 1996 H1_Lumi.Rsrc....................rsrc RSED....100152 Mon, Jul 15, 05:12 PM 1996 Usik's client application for monitoring of Coincidence Method of Luminosity measurement. Is supporting with activity of SPARC-applications. 8) HD_LPI5:Applications:Test_app:H1_Lumi:H1_Lumi H1_Lumi.........................APPL ????.....67320 Tue, Jun 04, 02:57 PM 1996 H1_Lumi.Rsrc....................rsrc RSED....100152 Tue, Jun 04, 02:54 PM 1996 Usik's client application for monitoring of Any Selected Method of Luminosity measurement. Is supporting with activity of SPARC-applications. 9) HD_LPI5:Applications:Test_app:HERA:HERA_client HERA_client.....................APPL USSA.....59876 Fri, Oct 04, 11:41 AM 1996 Lclient.Rsrc....................rsrc RSED.....94274 Tue, Jun 04, 06:18 PM 1996 Usik's client application made specially for HERA Control Room for monitoring of Any Selected Method of Luminosity measurement. Is supporting with activity of SPARC-applications. 10) HD_LPI5:Applications:Zclient:ZEUS_client ZEUS_client.....................APPL ????.....66744 Mon, Sep 26, 03:32 PM 1994 Lclient.Rsrc....................rsrc RSED.....95584 Mon, Sep 26, 03:43 PM 1994 Usik's client application made specially for ZEUS Control Room for monitoring of Any Selected Method of Luminosity measurement. Is supporting with activity of SPARC-applications. 11) HD_LPI5:SystemFolder:AppleMenuItems:LumiDAs:Energy_fic1 Energy_fic1.....................dfil movr.....19776 Thu, Apr 15, 01:10 PM 1993 Oldest application for monitoring of OnLineReconstruction and OnLineCalibration procedures for ET44 channels with different energy histos showing (ET44rec,PDrec, VCdep, ET44dep,PDdep,PDdep+VCdep,PDdep+ET44dep,PDrec+ET44rec) 12) HD_LPI5:sample2 sample2.........................APPL SHE2....104459 Sun, Feb 22, 03:37 PM 1998 Application for presentation of LongHistory archive data - rates, functions, histos, qvt-plot - trhrough AplleShare connected HD_H!LUMI disk at H1Lumi2 MacII (release for little screen) 13) HD_LPI5:SuperCard1.5:NewFastLUMI_Monitor98 NewFastLUMI_Monitor98...........MDOC RUNT...1069952 Mon, Jun 15, 01:50 PM 1998 SuperCard project for expert using. It is neded for monitoring of Local data acquisition for 4 local subtriggers, Local Data processing (OnLine Reconstruction of ET,PD,VC,ET44 responses, OnLineCalibration for ET,PD.VC and ET44 channels etc. ---------------------------------------------------- H1Lumi2 MacII - applications (h1lumi2.desy.de) ------------- - standard application set (are at H1Lumi2 MacII "StartUpItems") ============================================================== 1) HD_LPI:Development:Lproc98:Lproc98 Lproc98.........................APPL ????.....31408 Tue, Apr 14, 10:53 PM 1998 Lserv.Rsrc......................rsrc RSED.....16204 Thu, Apr 13, 04:55 PM 1995 Usik's server application for preparing of p-beam/e-beam background rates, radiation monitor and Monitoring counter rates (which are going into H1Lumi through CAMAC scalers). H1Lumi2 MacII only can access to CAMAC scalers. This application is preparing the mentioned values and puting it into DPM for using at SPARC server applications for distribution its everywhere. 2) HD_LPI:Development:LTVmonitor98:LTVsp98 LTVsp98.........................APPL ????.....68326 Tue, Apr 14, 10:39 PM 1998 LTVmon.Rsrc.....................rsrc RSED....101194 Mon, Jun 01, 06:44 PM 1998 Usik's application for presentation of Luminosity measurements values and connected rates at H1Lumi2 MacII large screen and and making of video-signal for presentation at any TV screen. 3) HD_H1LUMI:Backup:MPW:Wdog98:DAQcontr98(+Master.bin, Slave.bin) DAQcontr98......................APPL SHE1.....43657 Tue, Jun 16, 11:33 AM 1998 Master.bin......................TEXT ****....131072 Thu, Jun 11, 11:29 AM 1998 Slave.bin.......................TEXT ****....131072 Mon, May 18, 02:40 PM 1998 watchdog application for monitoring of Master FIC and Slave FIC operation and for automatically restart of applications at both FICs at case of problems. 4) HD_H1LUMI:OnlHistory:LongTerm98 LongTerm98......................APPL SHE2.....79620 Sun, Jun 14, 03:01 PM 1998 Application for making of long term history archive data at 1 GByte Hard Disc at H1Lumi2 MacII (rates, functions, histos, gvt-plot etc.) 5) System:TMonitor98p Tmonitor98p.....................APPL STND...1476487 Tue, Jun 16, 11:11 AM 1998 Application for supporting of H1Lumi shifter activity at RunControl and at RunSummary windows (moving of Platforms, Start/Stop of Luminosity measurements, Step1-Step2-Step3-Step4, Print Run Summary, Reset Integrated Lumis etc.) 6) HD_LPI:Applications:MovablePlatforms Movable Platforms...............MDOC RUNT....166144 Tue, Jun 16, 12:04 PM 1998 Application for making of interface from MacII environment for moving of PhotonArm and ET Movable Platforms. - applications for option or expert using: ======================================= 7) HD_H1LUMI:DesktopFolder:HistDisplay05 HistDisplay05...................APPL SHE2....118830 Wed, Nov 13, 03:53 PM 1996 Application for presentation of LongHistory archive data - rates, functions, histos, qvt-plot - directly at H1Lumi2 (release for large screen) 8) HD_LPI:Applications:LAN_Appls:H1Lumi_10minutes_Monitor H1Lumi_10minutes_Monitor .......APPL ????.....44196 Tue, May 09, 01:19 PM 1995 Lfclient.Rsrc...................rsrc RSED.....23654 Thu, Jun 04, 10:01 AM 1998 Usik's client application for presentation of all interesting parameters changing history during latest 10 minutes (Luminosity, SpecificLuminosity, e-beam/p-beam background rates, Radiation Monitor rate, Xpd and Ypd, etc. 9) HD_LPI:Applications:LAN_Appls:H1Lumi_2 hours_Monitor H1Lumi_2 _hours_Monitor........APPL USSA.....44062 Mon, May 29, 01:45 PM 1995 L2hclient.Rsrc..................rsrc RSED.....23898 Thu, Jun 04, 05:14 PM 1998 Usik's client application for presentation of all interesting parameters changing history during latest 2 hours (Luminosity, SpecificLuminosity, e-beam/p-beam background rates, Radiation Monitor rate, Xpd and Ypd, etc. 10) HD_LPI:Applications:LAN_Appls:H1Lumi_20hours_Monitor H1Lumi_20_hours_Monitor.........APPL LUML.....44082 Mon, May 29, 01:54 PM 1995 LLclient.Rsrc...................rsrc RSED.....23234 Sun, Jun 14, 10:09 AM 1998 Usik's client application for presentation of all interesting parameters changing history during latest 20 hours (Luminosity, SpecificLuminosity, e-beam/p-beam background rates, Radiation Monitor rate, Xpd and Ypd, etc. 11) HD_H1LUMI:Backup:Fomenko'sBackUp12.07.96:SuperCard:NewFastLumiMonitor98_2: NewFastLUMI_Monitor98_2.........MDOC RUNT....927296 Mon, Jun 15, 12:31 PM 1998 SuperCard project for expert using. It is neded for monitoring of H1Lumi data acquisition system insude 10th branch of H1CDAQ. ---------------------------------------------------- HERA MacII applications (hkrh1lumi.desy.de): ---------- 1) HD_HKR:Applications:HERA_Appls:Ph_method:H1_Lumi_ph H1_Lumi_ph......................APPL ????.....59858 Sat, Oct 05, 10:36 PM 1996 H1_Lumi.Rsrc....................rsrc RSED....100172 Mon, Aug 04, 10:44 AM 1997 2) HD_HKR:Applications:HERA_Appls:HERA:HERA_client HERA_client.....................APPL USSA.....59892 Fri, Mar 14, 03:35 PM 1997 Lclient.Rsrc....................rsrc RSED.....94282 Thu, Apr 17, 09:20 AM 1997 3) HD_HKR:Applications:HERA_Appls:c_method:H1_Lumi_c H1_Lumi_c.......................APPL ????.....59858 Sat, Oct 05, 10:53 PM 1996 H1_Lumi.Rsrc....................rsrc RSED....100154 Tue, Mar 25, 01:44 PM 1997 4) HD_HKR:Applications:HERA_Appls:H1Lumi_10_min_Monitor H1Lumi_10_min_Monitor...........APPL ????.....43934 Tue, Oct 01, 09:21 PM 1996 Lfclient.Rsrc...................rsrc RSED.....23652 Fri, May 29, 01:07 PM 1998 5) HD_HKR:Applications:HERA_Appls:H1Lumi_2 _hours_Monitor H1Lumi_2 _hours_Monitor........APPL USSA.....43778 Tue, Oct 01, 08:58 PM 1996 L2hclient.Rsrc..................rsrc RSED.....23956 Fri, May 29, 01:49 PM 1998 6) HD_HKR:Applications:HERA_Appls:H1Lumi_20_hours_Monitor H1Lumi_20_hours_Monitor.........APPL LUML.....44082 Mon, May 29, 01:54 PM 1995 LLclient.Rsrc...................rsrc RSED.....23246 Tue, Mar 25, 02:17 PM 1997 ---------------------------------------------------- PowerMacII applications (vmepm01.desy.de - 401st room): ---------- 1) vmepm01:Lumi:Lumi_Appls:H1Lumi_10minutes_Monitor H1Lumi_10minutes_Monitor........APPL ????.....43934 Tue, Oct 01, 11:21 PM 1996 Lfclient.Rsrc...................rsrc RSED.....23654 Wed, May 27, 06:04 PM 1998 2) vmepm01:Lumi:Lumi_Appls:H1Lumi_2 _hours_Monito H1Lumi_2 _hours_Monito.........APPL USSA.....43778 Tue, Oct 01, 10:58 PM 1996 L2hclient.Rsrc..................rsrc RSED.....23898 Thu, Jun 11, 09:34 PM 1998 3) vmepm01:Lumi:Lumi_Appls:H1Lumi_20_hours_Monitor H1Lumi_20_hour